How to prepare your files before you send them to me for Mixing
When preparing songs for a mix please follow these guidelines:
CHECK ALL EDITS
Make sure that all edits are good, take the time before you consolidate the files to really listen to the edit points to check for clicks, weird transitions, anything that might cause attention to be drawn to the edit.
REMOVE ALL PLUGINS and AUTOMATION
If you use any plugins please make sure that they are removed or bypassed before exporting your files.
If you are using any automation, please remove or bypass it before exporting.
If the automation or plugin is vital to the track, please export the automated / effected track in addition to the unprocessed file.
CONSOLIDATE ALL TRACKS FROM ZERO
Consolidate each track so that all of the audio files start at the same point (i.e. Bar zero...). This will allow them to be imported in the proper time relationship.
I can accept files in any combination of WAV, AIFF, or SDII format, and any combination of bit depths but all tracks need to be at the same sample rate..
CLEARLY LABEL ALL TRACKS
Please make sure that each track is clearly labeled. I need to know at a glance if "Jimi Outro" is a vocal, guitar or kazoo track...
Please make sure that all stereo files are named identically with a "dot R" and "dot L" designation.
If you are creating files on a Mac using OSX, make sure that the file permissions are set to "read/write"
As a last resort alternative to sending audio consolidated from bar zero, you can provide small audio files with the correct placement indicated in the file name (for example,"Guitar 2 bar 84"). For this method to work correctly, you must provide the exact tempo.
VOCALS:
Make sure that the lead vocal is comped and CLEARLY labeled.
If you have any ad-lib tracks which are separate from the lead vocal, be sure that they are properly labeled. In general, you can reduce confusion by making sure that any track which is intended to be included in the final mix is specifically labeled in a unique way.
INCLUDE FULL INFORMATION:
Please include with each song: tempo information, time signature, key signature, and any other applicable information.
ZIP EACH SONG FOLDER
Please place all of the tracks and notes in a new folder for each song, clearly labeled, and include the tempo information in the folder name, then ZIP the folder (on OSX hold the "control" key while clicking the mouse pointer on the folder and select "Create Archive of.." from the dropdown menu.
VERIFY EACH SONG
VERIFY each song by unzipping the archive and loading the tracks into a new session, so that you are aware of any missing tracks or misalignment issues.
How to Consolidate in Pro Tools
Simple directions:
Select each track all the way from the end back to a time index of zero.
Consolidate this selection. This will create a new continuous track.
Export that track as a wav or Aiff file to a new folder named "Consolidated (song name) audio xx bpm"
More thorough directions:
There are two ways to convert a single track within Pro Tools to .wav
files.
The first thing you have to do is CONSOLIDATE the audio
regions so they are displayed as one region (if there are any edits on
that track). The consolidate region function is in the Edit menu.
Highlight each region on that track and hit consolidate and they will
merge to one big region.
Once that is done and the selected track now appears as one continuous
audio region, you can go to the audio region list to the right hand of
the edit screen. Under this menu heading is an item called "export
region as file". If the region is highlighted and you select this
item, you will be prompted to select various audio file types (AIF,
WAV, SDll etc..) make sure you select "multiple mono files" so you
don't create a "false stereo file". Even though it says "multiple" if
the file is a single mono file, it will stay single.
The other way to do it is to "bounce" the file as a converted file
type. In this case it is not necessary to CONSOLIDATE the regions
first. In this technique, you are using the Pro Tools I/O to mix the
audio files into one new file. In real time.
Select all the regions in that track by holding down the shift key and
touching each region with the selector tool. Then go to File and
select BOUNCE. In this sub menu you will see dialog that will prompt
you to select the file type (.wav) also to name the file, the
resolution of the file (16bit @44.1khz) and where you wish to save the
file.
This will play back the track in real time and thus create a new file
in your desired format.
Points to consider:
1. Using the first technique is faster. The track will convert
quickly.
2. Using the first technique, the file will be named the same thing as
the audio region, so make sure it has a name that means something to
you.
3. In the BOUNCE technique, you must solo the track that you are
bouncing or the entire session will bounce to the new file.
4. Make sure that all tracks that you are BOUNCING are outputting
through channels 1 and 2 of the I/O. or they will not record to the
new file format (unless you select different output channels)
©1066 Chuck Zwicky